A repaint of the MILVIZ De Havilland Canada DHC-3 Otter in the New Misty Moorings Colors: by Reiner Test (MFC0004 / AKA1384).
(Original New Misty Moorings Colors/Theme designed by Klaus Tröeppner)

You must have the payware package MILVIZ Otter DHC-3 installed to use these textures.


Copy folder: texture.misty to the following airplane folders: (The same texture folder (texture.misty) works in all model variations - the only difference is a thumbnail or picture of each variation but this is also supplied with instructions)

1. ....   \SimObjects\Airplanes\DHC-3 Otter Milviz
2. ....   \SimObjects\Airplanes\DHC-3 Otter Milviz Amphibian
3. ....   \SimObjects\Airplanes\DHC-3 Otter Milviz Floats
4. ....   \SimObjects\Airplanes\DHC-3 Otter Milviz Skis


1. For aircraft folder DHC-3 Otter Milviz Otter  (which is the wheeled version): 
Open "aircraft.cfg" and copy and paste the following into ...\SimObjects\Airplanes\DHC-3 Otter Milviz  "aircraft.cfg"  below  your last [fltsim.xx] text block (where xx is the last highest number) and then change the ".xx" to the nextest higher number

[fltsim.xx]
title=DHC3 Base Misty Moorings N351MM
sim=Otter
model=1
panel=
sound=
texture=misty
kb_checklists=
kb_reference=
atc_id=N351MM
atc_parking_types=RAMP
ui_createdby="MilViz"
ui_typerole="Single Engine Prop"
ui_manufacturer="De Havilland Canada" 
ui_type="DHC3"
ui_variation="Base Version MISTY"
description="De Havilland Canada DHC-3. Repaint done by Reiner MFC0004." 
visual_damage=0



2. For aircraft folder DHC-3 Otter Milviz Amphibian   (Amphibian version)
Open "aircraft.cfg" and copy and paste the following into ...\SimObjects\Airplanes\DHC-3 Otter Milviz Amphibian   "aircraft.cfg"  below  your last [fltsim.xx] text block (where xx is the last highest number) and then change the ".xx" to the nextest higher number

[fltsim.xx]
title=DHC3 Amphibian Misty Moorings N351MM
sim=Otter
model=
panel=
sound=
texture=misty
kb_checklists=
kb_reference=
atc_id=N351MM
atc_parking_types=RAMP
ui_createdby="MilViz"
ui_typerole="Single Engine Prop"
ui_manufacturer="De Havilland Canada" 
ui_type="DHC3"
ui_variation="Amphibian Version MISTY"
description="De Havilland Canada DHC-3. Repaint done by Reiner MFC0004." 
visual_damage=0


3. For aircraft folder DHC-3 Otter Milviz Floats  (Floats version)
Open "aircraft.cfg" and copy and paste the following into ...\SimObjects\Airplanes\DHC-3 Otter Milviz Floats   "aircraft.cfg"  below  your last [fltsim.xx] text block (where xx is the last highest number) and then change the ".xx" to the nextest higher number

[fltsim.xx]
title=DHC3 Straight Floats Misty Moorings N351MM
sim=Otter
model=
panel=mv530_430
sound=
texture=misty
kb_checklists=
kb_reference=
atc_id=N351MM
atc_parking_types=RAMP
ui_createdby="MilViz"
ui_typerole="Single Engine Prop"
ui_manufacturer="De Havilland Canada" 
ui_type="DHC3"
ui_variation="Base Version MISTY"
description="De Havilland Canada DHC-3. Repaint done by Reiner MFC0004." 
visual_damage=0



4.For aircraft folder DHC-3 Otter Milviz Skis  (Skis version)
Open "aircraft.cfg" and copy and paste the following into ...\SimObjects\Airplanes\DHC-3 Otter Milviz Skis  "aircraft.cfg"  below  your last [fltsim.xx] text block (where xx is the last highest number) and then change the ".xx" to the nextest higher number

[fltsim.xx]
title=DHC3 Base Ski Misty Moorings N351MM
sim=Otter
model=
panel=mv530_430
sound=
texture=misty
kb_checklists=
kb_reference=
atc_id=N351MM
atc_parking_types=RAMP
ui_createdby="MilViz"
ui_typerole="Single Engine Prop"
ui_manufacturer="De Havilland Canada" 
ui_type="DHC3"
ui_variation="Base Ski Version MISTY"
description="De Havilland Canada DHC-3. Repaint done by Reiner MFC0004." 
visual_damage=0

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Thumbnails: 

The texture.misty folder contains a thumbnail.jpg file which is a thumbnail or picture of the DHC-3 Otter Milviz (wheeled) version.

For the thumbnail for DHC-3 Otter Milviz Amphibian version: Rename thumbnail-AMPH.jpg to thumbnail.jpg and place this file in the
\SimObjects\Airplanes\DHC-3 Otter Milviz Amphibian\texture.misty folder. (Replace - yes)

For the thumbnail for DHC-3 Otter Milviz Floats version: Rename thumbnail-FLOATS.jpg to thumbnail.jpg and place this file in the
\SimObjects\Airplanes\DHC-3 Otter Milviz Floats\texture.misty folder. (Replace - yes)

For the thumbnail for DHC-3 Otter Milviz Skis version: Rename thumbnail-SKIS.jpg to thumbnail.jpg and place this file in the
\SimObjects\Airplanes\DHC-3 Otter Milviz Skis\texture.misty folder. (Replace - yes)


Have fun and safe landings ;) 